China Tungsten Products Manufacturers Suppliers Factory

Your Professional Tungsten Products Supplier!

Luoyang Come On Metal Materials Technology Co., Ltd. is established in 2018 located in Luoyang City, China. Specializing in the research and development, production and sales of metal products for 10 years long. Our company specializes in R&D, processing and sales of titanium and titanium alloy ingots, rods, tubes, plates, wires and flanges, forgings, standard parts and other non-ferrous metal products such as tungsten, molybdenum and tantalum etc.

Fine Tungsten Foil
Fine Tungsten foil have attracted much attention due to their excellent performance and wide range of applications. . Tungsten sheets not only have excellent mechanical and chemical properties such
Pure Tungsten Wire
High melting point: tungsten wire melting point of 3422°C, is the highest of all metals, suitable for use in high temperature environment.. High density: density of 19.25g /cm3, close to gold, with
Pure Tungsten Sheet
Pure tungsten sheet is steel gray, with higher melting point (3410℃), greater hardness, higher density (19.3 g/cm3), lower thermal expansion coefficient, better electrical and thermal conductivity,
Tungsten Alloy Plate
Tungsten alloy plate has the characteristics of high density, high strength, good ductility and radiation shielding ability. Its density is generally 16.5~19.0g/cm3, which is more than twice the
Tungsten Round Rod
Tungsten round rod is a high-strength, high-density, and high melting point metal material widely used in industrial, aviation, chemical, mining and other fields. Among them, Φ 2.4-120mm high-quality
Tungsten Flat Bar
High melting point: flat bar has a very high melting point of about 3422 degrees Celsius, making it a suitable material for use in high temperature environments.. High hardness: Tungsten strip has a
Tungsten Pipe
1. Tungsten pipe has a very high purity, the general purity of more than 99.95%;. 2. Its density is more than 18.2g/cm3;. 3. The recommended operating temperature should be lower than 2500℃;. 4.
Tungsten Crucibles
Tungsten crucible has many advantages: Melting point high boiling point, good high temperature strength, anti-wear corrosion, high thermal conductivity, small coefficient of thermal expansion, good
Tungsten Fabricated Parts
‌High hardness and wear resistance: tungsten fabricated parts have a very high hardness, second only to diamond, so it has excellent wear resistance and compressive strength. This makes them
Tungsten Super Shot
Tungsten super shot is used in shotgun hunting shells. . Tungsten Super Shot (“TSS”) is a typical hard metal alloy product made of 95% Tungsten powder. 5% Nickle and Iron powder to reach a density as
Solid Tungsten Cube
Solid Tungsten cube is a kind of metal material, with high density, high melting point, high strength and other characteristics. It has a density of 19.35 g/cm ³, a melting point of up to 3410 ° C,

Why Choose Us

Rich Experience

Luoyang Come On Metal Materials Technology Co., Ltd. was established in 2018. Specializing in the research and development, production and sales of metal products for 10 years long.

Professional Team

We are a manufacturer of producing high strength Titanium product, with completely equipment, skillful technique, production line, experienced R & D and sales team.

Product Application

The products are mainly used in aerospace, ship, marine, petroleum, chemical, electric power, rare earth smelting, electric light source, medical equipment, metallurgical machinery, smelting equipment and other fields.

Our Best-Selling Tungsten Products

Fine Tungsten Foil

Tungsten sheets not only have excellent mechanical and chemical properties such as high hardness, high melting point, high corrosion resistance, high density, and low coefficient of thermal expansion, but also have good conductivity and thermal conductivity, making them an important industrial material.

Pure Tungsten Wire

Tungsten wire melting point of 3422°C, is the highest of all metals, suitable for use in high temperature environment.High density: density of 19.25g /cm3, close to gold, with high weight and stability. High resistivity: the resistivity of tungsten wire is 5.3*10^-8, suitable for use in the need of high resistance.

Tungsten Alloy Plate

Tungsten alloy plate has the characteristics of high density, high strength, good ductility and radiation shielding ability. Its density is generally 16.5~19.0g/cm3, which is more than twice the density of steel. The tensile strength of tungsten alloy in the sintered state is 800~1000MPa, after heat treatment and deformation processing, the strength can be increased to 1300~1500MPa.

Tungsten Products Physical Properties

Atomic NO.	74	Melting point	3420 ℃
Atomic weight	183.84 g/mol	Boiling point	5555 ℃
Crystal structure	Body-centered cubic (BCC)	Density (20℃)	19.25 g/cm3
Coefficient of linear thermal expansion	4.4×10-6 m/(m·K)	Thermal conductivity	164 W/(m·K)
Specific heat capacity	0.13 J/(g·K)	Electrical conductivity	18.2×106 S/m
Electrical resistivity	0.055 (Ω·mm2)/m

Advantages Of Tungsten Products

Outstanding creep resistance and high purity

Their high purity prevents any contamination of the sapphire crystal, while excellent creep resistance ensures the dimensional stability of the product. These properties remain stable even at extremely high temperatures.

Excellent electrical conductivity

Compared to other metals, tungsten has a low thermal expansion coefficient and high electrical conductivity, making it an ideal choice for thin film applications. Tungsten is a crucial component of TFTs (thin-film transistors) in LCD screens. Tungsten sputtering targets and Tungsten evaporation materials find wide applications in thin film coatings.

Extended lifespan and ultra-high melting point

Tungsten's extremely high melting point and exceptional high-temperature resistance result in outstanding performance under extreme conditions. Particularly in high-temperature vacuum furnaces like sapphire single crystal growth furnaces, Tungsten Crucibles, Tungsten Seed Crystal Chucks, and Tungsten Support Assemblies play pivotal roles.

Tungsten Products Mechanical Properties

Property	Tensile Strength	Young’s Modulus	Vickers Hardness	Elongation	Fatigue Strength
Value	550-680 MPa	411 GPa	600-1200 Hv	1%	310 MPa

Application of Tungsten Products

Aerospace & Defense: Used in high-temperature components, armor-piercing ammunition, and aircraft counterweights.

Electronics: Found in light bulb filaments, electrical contacts, and semiconductors.

Mining & Construction: Tungsten carbide enhances durability in cutting tools, drills, and tunneling machines.

Automotive: Used in engine parts, turbochargers, and braking systems.

Medical: Applied in radiation shielding, surgical tools, and implants.

Energy: Essential in nuclear reactors, welding electrodes, and wind turbines.

Jewelry & Fashion: Used in scratch-resistant rings and watches.

Sports & Recreation: Found in golf clubs, darts, and hiking gear.

Packaging and Shipping

Packaging	Wooden box
Transportation methods	Road transport, rail transport, sea transport, air transport

FAQ

Q: Does tungsten get hot?

A: Pure tungsten melts at a whopping 6,192 degrees F (3,422 degrees C) and won't boil until temperatures reach 10,030 F (5,555 C), which is the same temperature as the photosphere of the sun.

Q: What are the common types of tungsten products?

A: Common types include tungsten rods, wires, sheets, and alloys like tungsten carbide.

Q: How is the quality of tungsten products measured?

A: Through factors like purity, density, hardness, and microstructure analysis.

As one of the most professional tungsten products manufacturers and suppliers in China, we're featured by quality products and good price. Please rest assured to buy high-grade tungsten products from our factory. Contact us for pricelist.

tungsten wholesaler, tungsten jewelry, tungsten retailer